RULES OF THE ASSEMBLY OF BALUSTER FENCES
- You need to make a general outline and draw on the mounting surface.
- The maximum distance between pillars must not exceed 5 meters.
- Both the low and high base (inverted base) must be drilled to exact measurements to fit the baluster between them two duly leveled first.
- Mount the balusters on the low base using the bonding material.
- Present the high base (inverted base) and fill it again with the bonding material.
- Finish placing and pressing the handrail on the upper base (inverted base).
MOULD FILLING
Place the 6 m/m iron bar so it stands out the baluster mould, both above and below 5cm using the bar support base. Add the mix and vibrate the mould slightly, to avoid pinholes.
Baluster mould in injection of Thermoplastic (ABS)
It provides great resistance in concrete concrete.
Quick closing system.
Technical characteristics
B.0701
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| B.0701 | PL-BALUSTER | 35X10X10 |
B.0702
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| B.0702 | PL-BALUSTER | 46X8 |
B.0703
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| B.0703 | PL-BALUSTER | 50X12X12 |
B.0704
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| B.0704 | PL-BALUSTER | 69X10X10 |
B.0705
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| B.0705 | PL-BALUSTER | 69X10X10 |
B.0706
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| B.0706 | PL-BALUSTER | 75X10X10 |
B.0707
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| B.0707 | PL-BALUSTER | 75X10X10 |
B.0708
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| B.0708 | PL-BALUSTER | 75X12X12 |
B.0709
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| B.0709 | PL-BALUSTER | 45X12X12 |
B.0710
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| B.0710 | PL-BALUSTER | 75X12X12 |
B.0711
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| B.0711 | PL-BALUSTER | 66X12X12 |
B.0714
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| B.0714 | PL-BALUSTER | 71,5X12X12 |
B.0715 – B.0712
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| B.0715 | PL-BALUSTER | 91X12X12 |
| B.0712 | PL-BALUSTER | 91 X 11D |
B.0716
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| B.0716 | PL-BALUSTER | 50X9.5X9.5 |
B.0718
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| B.0718 | PL-BALUSTER | 42X12X12 |
B.0719
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| B.0719 | PL-BALUSTER | 73.5X12X12 |
B.0720
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| B.0720 | PL-BALUSTER | 50X10X10 |
B.0721
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| B.0721 | PL-BALUSTER | 73.5X12X12 |
B.0722
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| B.0722 | PL-BALUSTER | 50X10X10 |
B.0723
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| B.0723 | PL-BALUSTER | 73.5X12X12 |
B.0724
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| B.0724 | PL-BALUSTER | 50X10X10 |
B.0725
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| B.0725 | PL-BALUSTER | 70X12.5X12.5 |
B.0726
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| B.0726 | PL-BALUSTER | 85X9.8X9.8 |
B.0727
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| B.0727 | PL-BALUSTER | 85X9.8X9.8 |
B.0728
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| B.0728 | PL-BALUSTER | 65×12.5×12.5 |
B.0731
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| B.0732 | PL-BALUSTER | 50X10X10 |
B.0732
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| B.0732 | PL-BALUSTER | 73.5X12X12 |
ES.0701
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| ES.0701 | PL-BALUSTER | 22X22X22 |
ES.0702
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| ES.0702 | PL-BALUSTER | 22X22X22 |
P.0701
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| ES.0702 | PL-BALUSTER | 100×17 |
P.0702
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| ES.0702 | PL-BALUSTER | 50X17 |
P.0703
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| ES.0703 | PL-BALUSTER | 100X17 |
P.0704
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| ES.0704 | PL-BALUSTER | 50X17 |
P.0705
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| ES.0705 | PL-BALUSTER | 100X17 |
P.0706
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| ES.0706 | PL-BALUSTER | 50X17 |
Z.0703
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| Z.0703 | PL-BALUSTER | 100X16 |
Z.0704
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| Z.0704 | PL-BALUSTER | 50X16 |
Z.0704
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| Z.0704 | PL-BALUSTER | 50X17 |
FIBRE BALAUSTER MOULD
Instructions
-
Moudl greased with release agent Decodes.
-
Assembly: clamps, base and optional 6-8 mm bar
Concrete composition:
40% Cement (white or gray.)
60% Sand (ordinary.)
Water (liquid concrete mix.)
-
Fill:
We recommend using a tube and a funnel, introduce the tool into the mould and spill the concrete through this, lifting it as we fill the mould, shake it with the same tool to remove air. Drying and mould release: 24 hours (not exposed to the sun). Barbotine: cement + water. In case you notice any spots (small holes) prepare barbotine and fill in and remove the excess of barbotine with a damp sponge.
Technical characteristics
PIN.01
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| PIN.01 | MT-TONG | 82X9X9,5 |
BS.01
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| BS.01 | MT-BALUSTER BASE | 20X20X5 |
B.0012
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| B.0012 | PL-BALUSTER | 82X11X11.5 |
B.0013
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| B.0013 | PL-BALUSTER | 82X9X9,5 |
B.0014
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| B.0014 | PL-BALUSTER | 60X14X15 |
B.0715
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| B.0015 | PL-BALUSTER | 61X18X19 |
B.0716
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| B.0016 | PL-BALUSTER | 56.5X13X14.5 |
B.0717
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| B.0017 | PL-BALUSTER | 43,5X10,5X10,65 |
B.0018
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| B.0018 | PL-BALUSTER | 51X16X16 |
B.0019
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| B.0019 | PL-BALUSTER | 61X13X13 |
B.0020
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| B.0020 | PL-BALUSTER | 61X12,5X12,5 |
B.0021
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| B.0021 | PL-BALUSTER | 65,5X20X20 |
B.0022
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| B.0022 | PL-BALUSTER | 65X16X16 |
B.0023
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| B.0023 | PL-BALUSTER | 81X20X20 |
IMITATION WOOD POLYESTER + FIBERGLASS BALUSTER MOULDS
B.0024
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| B.0024 | Imitation Wood | 10X10X91CMS |
B.0025/0026
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| B.0025 | Imitation Wood | 10X10X78CMS |
| B.0026 | Imitation Wood | 10X10X75CMS |
B.0027
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| B.0027 | Imitation Wood | 10X10X50CMS |
PL.06
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| PL.06 | Woo pillar | 13.5×13.5×100 CMS |
PL.07
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| PL.07 | Woo pillar | 18x18x110 CMS |
RB.07
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| RB.07 | Ball finishing |
P.05/06
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| P.05 | Wood handrails | 7x15x100CMS |
| P.06 | Wood handrails | 4x15x100CMS |
P.07/o8
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| P.07 | Wood base | 7x13x100CMS |
| P.08 | Wood base | 7x13x100CMS |
POLYESTER PILLAR MOULDS
PL.02/3-4-5-6
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| PL.02/3 | P-PILLAR | 20X20X100 |
| PL.02/4 | P-PILLAR | 20X20X90 |
| PL.02/5 | P-PILLAR | 20X20X70 |
| PL.02/6 | P-PILLAR | 20X20X60 |
PL.03
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| PL.03 | P-PILLAR | 20X20X105 |
PL.05/1-2-3-4-5
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| PL.05/1 | P-PILLAR | 20X20X100 |
| PL.05/2 | P-PILLAR | 20X20X90 |
| PL.05/3 | P-PILLAR | 18X18X100 |
| PL.05/4 | P-PILLAR | 18X18X90 |
| PL.05/5 | P-PILLAR | 16X16X100 |
ACC/PL1
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| ACC/PL1 | MT-COUNTERMOULD | 17X17X105 |
ACC/PL2
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| ACC/PL2 | COUNTERMOULD EXTRACTOR |
ACC/PL.3
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| ACC/PL.3.1 | P-BASE | 30X30X3 |
| ACC/PL.3.2 | P-BASE | 40X40X3 |
POLYESTER FINISHES MOULDS
RM.01.2 – RM.01.4
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| RM.01.2 | P-FINISHING | 32X32X11 |
| RM.01.4 | P-FINISHING | 50X50X11 |
RPR.01
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| RPR.01.1 | P-FINISHING | 32X32X11 |
| RPR.01.2 | P-FINISHING | 50X50X11 |
| RPR.01.4 | P-FINISHING | 23X23X18 |
RBS.01
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| RBS.01.1 | P-FINISHING | 27X27X5 |
| RBS.01.2 | P-FINISHING | 27X27X11 |
| RBS.01.3 | P-FINISHING | 30X30X6 |
| RBS.01.4 | P-FINISHING | 40X40X6 |
| RBS.01.5 | P-FINISHING | 45X30X6 |
RB.01
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| RB.01 | P-BALL FINISHING | 22X22X18D |
RB.02
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| RB.02 | P-BALL FINISHING | 20X25X25 |
RB.03.1 – RB.03.2
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| RB.03.1 | P-BALL FINISHING | D.25 |
| RB.03.2 | P-BALL FINISHING | D.35 |
RB.04.02
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| RB.04.2 | P- BALL NECK FINISHING | D.35 |
RB.05
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| RB.05 | P- CUELCOPALO BALL FINISHING | 22.5X22.5X35 |
RB.06.1
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| RB.06.1 | P-PINEAPPLE FINISHING | 19.5X19.5X28 |
ROCT.07
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| ROCT.07 | P-OCT. VASE FINISHING | 25X25X35 |
RB.07
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| RB.07 | P-POMEGRANATE FINISHING | 22X22X38 |
ROB.01
| REFERENCE | DESCRIPTION | DIMENSIONS CM |
|---|---|---|
| ROB.01 | P-OBE FINISHING | 22.5X22.5X40 |
Did you like what you see? Share us on social networks:
